Application
This machine is suitable for the core wire pair twisting of Cat5/6 Lan cables.
Product Introduction
- Constant tension from empty to full bobbin, the machine can automatically track and adjust take up tension, can adjust tension without stopping.
- The wire-passing system adopts a new structure and the wire directly passed from the main shaft guide wheel to bow band, so the scratching and jumping phenomenon caused by failure of the comer guide wheel on the Al wheel is subtracted.
- The main engine is oil lubricated and naturally circulated and cooled, which effectively extends the service life of the main shaft bearings. The bearings of the whole machine are all well-known Japan brands. The bow belt is made of new materials and has good flexibility. In high-speed operation, it avoids jumping stock caused by vibration. Inverter, magnetic powder clutch, electromagnetic brake, hydraulic jack etc are all imported famous brands.
- Easy to operate.
- Siemens software, PLC control, change gear to change lay length.
Application
This machine is suitable for the core wire pair twisting of Cat5/6 Lan cables.
Product Introduction
- Constant tension from empty to full bobbin, the machine can automatically track and adjust take up tension, can adjust tension without stopping.
- The wire-passing system adopts a new structure and the wire directly passed from the main shaft guide wheel to bow band, so the scratching and jumping phenomenon caused by failure of the comer guide wheel on the Al wheel is subtracted.
- The main engine is oil lubricated and naturally circulated and cooled, which effectively extends the service life of the main shaft bearings. The bearings of the whole machine are all well-known Japan brands. The bow belt is made of new materials and has good flexibility. In high-speed operation, it avoids jumping stock caused by vibration. Inverter, magnetic powder clutch, electromagnetic brake, hydraulic jack etc are all imported famous brands.
- Easy to operate.
- Siemens software, PLC control, change gear to change lay length.
Technical Parameters
| Model | PY-Φ500mm | ||||
|---|---|---|---|---|---|
|
Max rotation speed |
Max rotation speed MAX1500RPM |
||||
|
Main motor |
5HP + 5HP frequency conversion speed regulation |
||||
|
Bobbin size(mm) |
MAX Φ500(OD)*Max*320(Outer Width) or made per customer request |
||||
|
Bobbin weight requirement |
<250;wire pay-off tension 3-10N |
||||
|
Pay-off bobbin(mm) |
Φ500 (OD)x56(ID)x300(Outer Width) |
||||
|
Tension range |
200g, stable and adjustable |
||||
|
Back-twist tension stand |
Reserve line tension sensor stand, linkage with take up motor ensure constant tension wire pay-off |
||||
|
Pay-off device |
Vertical double heads, tension wheel 120mm, 4+6ditch, precision potentiometer |
||||
Technical Parameters
| Model | PY-Φ500mm | ||||
|---|---|---|---|---|---|
|
Max rotation speed |
Max rotation speed MAX1500RPM |
||||
|
Main motor |
5HP + 5HP frequency conversion speed regulation |
||||
|
Bobbin size(mm) |
MAX Φ500(OD)*Max*320(Outer Width) or made per customer request |
||||
|
Bobbin weight requirement |
<250;wire pay-off tension 3-10N |
||||
|
Pay-off bobbin(mm) |
Φ500 (OD)x56(ID)x300(Outer Width) |
||||
|
Tension range |
200g, stable and adjustable |
||||
|
Back-twist tension stand |
Reserve line tension sensor stand, linkage with take up motor ensure constant tension wire pay-off |
||||
|
Pay-off device |
Vertical double heads, tension wheel 120mm, 4+6ditch, precision potentiometer |
||||