Application
The equipment is used for heat treatment (annealing) of hard copper wire and tin can be plated on the surface of copper wire while annealing.
(Special note: the method of tin plating is hot dip tin plating that is, tin is heated, melted and plated on the surface of copper wire)
Equipment Outline Drawing
Technical Features
- The length of furnace body and the number of production wire heads can be designed according to requirements.
- The take-up adopts single-side cable arrangement design, which can use two different sizes of cable spools at the same time.
Application
The equipment is used for heat treatment (annealing) of hard copper wire and tin can be plated on the surface of copper wire while annealing.
(Special note: the method of tin plating is hot dip tin plating that is, tin is heated, melted and plated on the surface of copper wire)
Equipment Outline Drawing
Technical Features
- The length of furnace body and the number of production wire heads can be designed according to requirements.
- The take-up adopts single-side cable arrangement design, which can use two different sizes of cable spools at the same time.
Technical Parameters
| Model | WM-40 | ||
|---|---|---|---|
|
Application |
Used for softening and tinning round copper wire |
||
|
Number of production heads |
20, 40, 60 heads |
||
|
Annealing furnace length |
5 m |
7 m |
9 m |
|
Wire diameter |
Φ0.05 -0.15 mm |
Φ0.1 -0.35 mm |
Φ0.14 -0.6 mm |
|
Pay-off mode |
Curl flyer or constant tension pay off |
||
|
Max. line speed |
300 m/min |
||
|
Tinning method |
Single/double furnace hot plating(horizontal plating) with mold scraping tin |
||
|
Pay off spool size |
Φ 300 mm |
||
|
Take up mode |
Single spool torque take up |
||
|
Softening mode |
Continuous annealing by electric heating with water seal protection |
||
|
Take up spool size |
PT10-PT25 |
||
|
Tin furnace power |
15 KW |
||
|
Configured power |
50 KW |
||
|
Power supply |
400V, 50/60 Hz |
||
|
Machine dimension |
L20500 x W1540 x H2378 mm |
||
|
Machine weight |
4500 kg |
||
Technical Parameters
| Model | WM-40 | ||
|---|---|---|---|
|
Application |
Used for softening and tinning round copper wire |
||
|
Number of production heads |
20, 40, 60 heads |
||
|
Annealing furnace length |
5 m |
7 m |
9 m |
|
Wire diameter |
Φ0.05 -0.15 mm |
Φ0.1 -0.35 mm |
Φ0.14 -0.6 mm |
|
Pay-off mode |
Curl flyer or constant tension pay off |
||
|
Max. line speed |
300 m/min |
||
|
Tinning method |
Single/double furnace hot plating(horizontal plating) with mold scraping tin |
||
|
Pay off spool size |
Φ 300 mm |
||
|
Take up mode |
Single spool torque take up |
||
|
Softening mode |
Continuous annealing by electric heating with water seal protection |
||
|
Take up spool size |
PT10-PT25 |
||
|
Tin furnace power |
15 KW |
||
|
Configured power |
50 KW |
||
|
Power supply |
400V, 50/60 Hz |
||
|
Machine dimension |
L20500 x W1540 x H2378 mm |
||
|
Machine weight |
4500 kg |
||